Synergy 4034 - Air Compressor Bracket 12+ JK w/ 3.6L Penta Instrukcja Użytkownika Pobierz pdf

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397

INSTALLATION INSTRUCTIONS

PPM-4034 JEEP JK COMPRESSOR MOUNT KIT

2012- Present 3.6L Pentastar

GENERAL NOTES:

• These instructions are also available on our website at

www.synergymfg.com Check the website for any updated instructions and

additional photos for reference.

Installation time 20 minutes to 1 hour.

Kit contents: (1) Compressor Bracket (7) Zip Ties (1) Hose and Fitting

Required Tools:

- 13mm Wrench (preferably a ratcheting wrench) - Philips Head Screw Driver

- 13mm Socket and ¼” ratchet with long extensions - Small Crescent Wrench

Advisory: Do not bump, or pull the master cylinder away from the booster during this install. Doing so

will dislodge the booster O-Ring. If the O-Ring becomes dislodged, do not drive the Jeep and contact

tech support for additional information.

1. Using firm pressure and pushing as indicated in the following picture, bend the rigid A/C hose

toward the engine, in order to provide clearance for the bracket.

Using fasteners and

fittings supplied with

your compressor kit,

and thread locker

assemble the

compressor on the

bracket, as indicated in

this picture:

Use thread sealant for

proper installation.

Teflon tape is not

recommended. Properly

sealed, recommended

torque is 12 to 15 ft. lbs.

1 2 3 4

Podsumowanie treści

Strona 1 - 2012- Present 3.6L Pentastar

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 INSTALLATION INSTRUCTIONS PPM-4034 JEEP JK COMPRESSOR MOUNT KIT 2012- Presen

Strona 2

2 2. Re-route the Vacuum Hose behind the AC line, as shown in the following picture: 3. Insert the 90 degree plastic fitting (attached to small ho

Strona 3

3 6. Zip tie the sensor to hold the hose clear of the compressor head. 7. Install the compressor and bracket assembly onto the maste

Strona 4

4 8. The following picture shows a ratchet and several extensions, that make installing the second master cylinder nut easier: 9. Installation com

Komentarze do niniejszej Instrukcji

Brak uwag

Synergy 4034 - Air Compressor Bracket 12+ JK w/ 3.6L Penta Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Do samochodu Synergy 4034 - Air Compressor Bracket 12+ JK w/ 3.6L Penta. Synergy 4034 - Air Compressor Bracket 12+ JK w/ 3.6L Pentastar User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Do samochodu Synergy 4034 - Air Compressor Bracket 12+ JK w/ 3.6L Penta